Skip to main content
Note to our Great Customers: 
Update on our Shopping Center: 7 Mile Cycles is not being torn down, moving or closing its doors! Two new buildings are going to built in the same center that we are in and we will be moving into an all new space sometime in 2025!
We are very excited to see this project come together and look forward to our ALL NEW store at the corner of Higgins & Arlington Heights Road!
Click here to see the proposed development!

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Fenders

$14.99
A quick and easy clip-on fender designed to work with the Trek Blendr Saddle Bag and Blendr saddle accessory mounts. The Blendr Fendr clips onto rear saddle mounts in seconds to prevent water and road kick-up from getting you dirty. Quick and easy installation and removal keep you ready to ride no matter the weather. Plus, you can easily mount a rear light to keep you seen. Details: - Connects to the Blendr Saddle Bag mount and Blendr Saddle Accessory mount - Lightweight plastic keeps your backside dry with almost no weight penalty - Integrated light mount makes it easy to quickly add a fender and rear light - Fits into a back jersey pocket or easily into a bag - Compatible with all wheel and tire sizes for road, gravel, and commuter bikes
$39.99
Original equipment replacement fenders for your ride. Keep yourself and your gear clean and dry with a stylish fender. PRODUCT DETAILS - Size-specific fit for original tire spec - Stays and hardware sold separately - Length: Fender-end (BB side) to middle of slotted seatstay mount hole—316mm - See your bike's specific product page for compatibility
$9.99
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz
$24.99
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube - Two tone injected high impact resistant plastic - Weight: 233 grams - Rear angle adjustable - 73x21x11cm/28.7x8.3x4.3-inch
$44.95
Topeak's DeFender XC1 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. Extra clearance makes it perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.
$24.99
Keep water and mud at bay with SKS's Dashblade fender! It's light and easy to install and remove thanks to its quick-release strap that fits a wide variety of seatposts and seat tubes.
$14.99
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
$54.99
S-BOARD This smart clip-on front mudguard is for road, cyclocross, hybrid, gravel bikes, etc. Suited for maximum tire width up to 38mm, it is the ideal companion to our S-BLADE rear mudguard. Its smart, double-hinged, quick-release fitting system also fits aero forks. Paintwork protection film for the frame is included. S-BLADE The S-BLADE is the little brother of our top-selling X-TRA-DRY for the ambitious racing cyclist. With our quick-release mounting, the S-BLADE can be fitted on virtually any racing bike, and the angle setting can be optimally adjusted. - Weight: 206g - Wheel size: 650B – 28-inch - Tire width: 30 – 38mm - Length front fender: 390mm - Length rear fender: 465mm
$16.99
The X-Board is an innovative clip-on fender with rubber fasteners for downtube mounting. - Adjustable soft rubber cable-spacers, ideal to adapt on almost any tube profile - Robust rubber fasteners - Dual compound-softspoiler
$17.99 - $24.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
$14.99
Planet Bike's Grunge Board is an easy-to-mount front fender that keeps you dry and clean when it's wet and muddy. It's made from a nearly indestructible polymer and it mounts in seconds to your down tube with the 2 rubber straps.
$32.99
The Grunge Rear seat post mounted fender is designed with an 85mm wide profile to shield your rear end from spray, mud and crud. It'll keep you clean on your commute or when ripping around on singletrack. - Durable all-weather polypropylene blade - Quick release seatpost mount attaches and removes in a snap - Features fender angle adjustability to fit most bikes and dial in spray protection - Eyelets Required?: No - Wheel size: 24", 26", 650b, 29" and 700c - Fender width: 85mm wide x 460mm long - Max tire width: 2.25" - Weight: 174 grams
$49.99
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders will provide years of use. With their pre-installed mounting hardware you can install and remove them in seconds.
$20.99 - $21.99
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability
$24.99 - $32.99
These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle
$15.99 - $19.99
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370mm (14.5") - Weight: 60g (2.1oz)
$20.99 - $24.99
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)
$22.99 - $29.99
MTB+ and Fat Bike compatible - Fits up to 4" tires - 100% recyclable Polypropylene construction - Lightweight, durable, and easy to install/remove
$22.99 - $29.79
Lightweight, removable fender intended for MTB use - Adjustable rubber straps make installation quick and easy - 100 percent recyclable polypropylene
$21.99
- Suitable for tire widths between 23mm and 42mm - Cable routing friendly - Not recommended for use with non-housed/exposed rear brake cables - Keeps you clean and dry on wet roads and trails - Newly improved designs in multiple options for better coverage - Attaches quickly without tools - Stores easily in a backpack or jersey pocket - Application: Front - Fender Size: 390mm x 110mm - Wheel Size: Universal - Material: Polypropylene - Weight: 30g
$21.99
- Suitable for tire widths between 32mm and 55mm - Keeps you clean and dry on wet roads and trails - Newly improved designs in multiple options for better coverage - Attaches quickly without tools - Stores easily in a backpack or jersey pocket - Application: Front - Fender Size: 170mm x 90mm - Wheel Size: Universal - Material: Polypropylene - Weight: 21g
$23.99
- Suitable for tire widths between 23mm and 35mm - Keeps you clean and dry on wet roads and trails - Newly improved designs in multiple options for better coverage - Attaches quickly without tools - Stores easily in a backpack or jersey pocket - Application: Rear - Fender Size: 540mm x 65mm - Wheel Size: Universal - Material: Polypropylene - Weight: 50g
$23.99
- Suitable for tire widths between 32mm and 55mm - Keeps you clean and dry on wet roads and trails - Newly improved designs in multiple options for better coverage - Attaches quickly without tools - Stores easily in a backpack or jersey pocket - Application: Rear - Fender Size: 555mm x 80mm - Wheel Size: Universal - Material: Polypropylene - Weight: 60g
$13.99
- Suitable for tire widths between 30mm and 50mm - Keeps you clean and dry on wet roads and trails - Newly improved designs in multiple options for better coverage - Attaches quickly without tools - Stores easily in a backpack or jersey pocket - Application: Rear - Fender Size: 380mm x 115mm - Wheel Size: Universal - Material: Polypropylene - Weight: 25g
$21.99
A fatbike fender for rigid forks - The innovative design of the Fat Face Fender XL provides maximum front-end protection, from a flexible fender, at a fraction of the weight of a bolt-on guard; a great option for riders that want the protection without the bulk.
$32.99
Meet the Mucky Nutz MugGuard... our super, snazzy, award-winning mudguard for mountain bikes, made in the UK from 100% recycled plastic.
$63.99 - $69.99
Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. Fenders intended for warranty and service use. - Original replacement fenders for Electra Townie bikes - Color matched for direct compatibility
$59.99 - $69.99
Ride in any weather The Bontrager NCS fender is everything you want in a fender. It installs in seconds, is available in a variety of sizes to fit various bikes, and offers full coverage to keep you dry. The no-cut design includes everything you need for easy installation and it even comes with an integrated Blendr rear light mount. Product details - Fully assembled fenders that install in minutes - Integrated rear Blendr light mount for use with Bontrager Flare lights - No-cut struts allow quick strut adjustment for proper tire clearance - Double-back strut on rear fender adds support and stability - Made of lightweight yet super-durable polycarbonate - Stainless steel hardware resists rust - Four sizes available to accommodate most bike and tire configurations
$64.99
Keep your tail clean On some rides you want a fender. The Universal Fat Bike Fender is designed to offer quick and easy installation so that riding with a fender can be a game-time decision. The versatile attachment clamp securely mounts to most seatposts, and the front and rear set are designed to work with tire widths from 3.0 to 4.75 inches. Product details - Front and rear fender set fits tire widths from 3.0 to 4.75 inches - Versatile fender offers simple and effective protection from the elements - Universal attachment clamp designed to fit most seatposts - Quick and easy installation or removal - Trim lines on front fender offer customizable shape to fit tires and bike
$18.99
Axiom's Frontrunner Front Fender easily installs on your down tube with rubber straps. Axiom reduced the impact of their manufacturing and shipping methods by designing the Frontrunner to fold flat. It's also made of strong, 100% recyclable plastic.
Page 1 of 4 Next page