Cranksets

- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30

- Aluminum Hollowtech-II (HT8) crank-arm to BB-spindle Mounting Bolt - Bolt: only one needed for non-drive side

Harness the power of your tandem team with FSA's Gossamer MegaExo Tandem Crankset. The rear crankset features cold-forged aluminum crankarms, hill-topping 52/39/30 chainrings, a 42-tooth idle chainring, and a proprietary spacer system to fine-tune your chainline.

Race Face Cinch aluminum crank arm bolt. 18mm, fits XC/AM cranks.

Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.

When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the new DZero measures power in the heart of the bicycle—the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DZero represents the state of the art in power meter technology As Quarq’s next generation of power meters, the DZero combines 10 years of technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app. - 10K temperature compensation: Eliminates variables caused by heat and cold to provide an unwavering record of your performance through all conditions - Built to last: Features an IPX7 waterproof rating - Bluetooth low energy technology and ANT+ wireless data transfer - Battery: CR2032, 200-hour battery life, change without tools - OmniCal: swap chainrings without affecting accuracy. - 2-year warranty - IPX7 waterproof rating - Accuracy within 1.5% - Bottom Bracket Compatibility: SRAM GXP - Forged aluminum models do not work with BBright or BB386EVO bottom brackets

Super strong and ultra durable, Shimano's ZEE Cranks are tailor-made for aggressive riders, DHers and dirt jumpers that don't have endorsement deals. They use a 2-piece design with solid aluminum arms as well as a steel axle and steel pedal inserts for longevity. Stiffness was put at a premium, so if you need to stomp on the pedals to get up to speed quickly, or if you're a Clydesdale who punishes lesser cranksets, ZEE has your back. It's 10-speed compatible and is equipped with a 36-tooth chainring. The bottom bracket is included, too.

- Various choices for bike and riding style - More durable chainwheel teeth - New 3D composite chain ring's teeth composition is optimized for each chainwheel load out (1x11, 2x11 & 3x11) with steel driving gear teeth and aluminum support gears - Improved driving rigidity - Loose ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Model Number : FC-M8000-2 - Series : DEORE XT - Cassette Compatibility : 11 - Bolt Circle Diameter : P.C.D. 96/64mm - Crank Arms : HOLLOWTECH II Technology - Bottom Bracket : BB-MT800 / BB-MT800-PA - Chain Line : 48.8mm - BB Shell Width : 68, 73mm

Shimano Dura-Ace Left Crank Arm. - Spindle Interface Type: Hollowtech II

Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank

Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with Specialized S-Works cranksets that have removable spiders/chainrings and are only compatible with CAMO rings and bolts. One chainline option is available for S-Works cranks. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M1 (minus 1mm - dished toward the frame): For 49mm chainline, designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes.

When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the new DZero measures power in the heart of the bicycle—the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DZero represents the state of the art in power meter technology As Quarq’s next generation of power meters, the DZero combines 10 years of technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app and, for the carbon version, compatibility with BB386EVO bottom brackets. - 10K temperature compensation: Eliminates variables caused by heat and cold to provide an unwavering record of your performance through all conditions - Built to last: Features an IPX7 waterproof rating - Material: CNC Machined Aluminum Spider, Exogram Carbon Crank Arms - Accuracy: 1.5% - Bolt Circle Diameter: 130 BCD, 110 BCD - Q-Factor: 145mm - Wireless Technology: ANT+, Bluetooth low energy technology - Battery: CR2032, 200 hours of riding time - Weight: 578/559 grams (130/110 BCD) - Head Unit Compability: ANT+ and Bluetooth low energy technology compatible head units (available separately) - Compatibility: Traditional 5 bolt chainrings from most manufacturers. Hidden (HB) and Non-hidden Bolt (NHB) patterns. 10-speed, 11-speed, 1X and 2X. *Not compatible with Campagnolo chainrings

- Series: SORA - Crank Construction: 2-piece crank construction - Bottom Bracket: BB-RS500, BB-RS500-PB - Chain Line: 43.5 - 9-speed - Four-arm BCD

Shimano's Tiagra Front Chainwheel is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Series: Tiagra 4700 - Crank Construction: 2-piece crank construction - Cassette Compatibility: 10-speed - Chain Compatibility: Series color - Bottom Bracket: BB-RS500 / BB-RS500-PB

Surly offers you spiders for their Mr. Whirly Cranks in a variety of Bolt Circle Diameters (BCDs) so you can run nearly any chainring combination you want. Be sure to check chainring/frame compatibility for your intended setup.

This OD Crank Single Speed Spacer Kit gets your Surly OD Crank ready to run as a single. Indluces chainring bolts and spacers. Just add chainring (sold separately).

Surly designed the O.D. crankset to offer frame and tire clearance while maintaining a reasonable q-factor (pedal stance). Maximizing the distance between the chain and the tire is important on fat bikes such as the Pugsley and Moonlander, or if you're running really big tires and rims on some other bike (like our new Krampus, for example). With normal cranks, wide tires on wide rims can rub the chain when in the lowest, or farthest-inboard, gear combinations. Like the MWOD crank, the O.D. crank doesn't just add a longer spindle to move the rings outboard. Rather, it does away with the big ring of a standard triple and moves the middle and granny rings to the outer and middle positions. This effectively moves the rings outboard without moving the arms outboard too. The O.D. is a simple, dedicated version of this idea. Neato! Forged of 7000 series T6 aluminum, the O.D. crank is a 2-piece, with spindle embedded inextricably in the drive side arm. It's a dedicated 2x, although its chainline is outboard a bit compared to standard mountain cranks, and it is 9 and 10 speed compatible. The 132mm, PF41 bottom bracket O.D. crank is what goes on the Ice Cream Truck bikes, so if you've got that setup, that's your crank. Surly also offers 33t and 20t rings separately. These chain rings are designed to shift best in specific combinations….change to a 39/22t, for example, and your shifting will suffer. The bearings on which they spin are also worth mentioning: Surly upgraded the bearings on these and the Mr. Whirly and MWOD cranksets to aftermarket Enduro bearings with double labyrinth seals, meaning they actively shed and stay clean of dust, muck, and grime, even in wet and muddy climates.

Shimano's CX50 Crankset features lightweight, hollow-forged aluminum arms and two-piece construction for high-efficiency power transfer to get you through the mud and on the podium. The 36/46 chainring setup is a 'cross friendly combination, and Shimano's wide pitch crank design eliminates chain rub in cross-gear situations. SG-X chainrings boast the shift-at-will performance Shimano is known for.

However you want to brand it, pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. That’s why Race Face took elements from their SixC designs and incorporated them with the best of Next to make an aggressive ruckus ready crank that can take you to the EWS podium. Light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - Handmade in Canada - Downhill rated SixC G2 Pedal Insert for increased Rally Factor - Burlier 7050 alloy spindle - Cinch technology for game-changing compatibility

Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)

Lightweight, durable, stiff and designed specifically to work with Bosch and Brose mid-ship motors, SRAM's EX1 crankarms are purpose built for the high-torque E-MTB environment. - Proven SRAM technologies adapted for the demands of midship-motor E-MTBs - Compatible with Bosch, Brose and Yamaha bottom bracket interfaces - Arm Material: Aluminum - Colors: Black - Bottom Bracket Interface: ISIS

SRAM's power meter technology is reliable, accurate and easy to use. Now available as a spider by itself as an easy upgrade for existing cranks. The Dzero series offers improved data transfer and frame fit compatibility. - Fits 8-Bolt interface Quarq XX1 Power Meters (8-Bolt used since Aug '14) - Measures power for both legs with +/- 1.5% accuracy - Dual Bluetooth lowenergy and ANT+ wireless data transfer - AxCad system provides no-magnet cadence data - Free firmware updates with the QALVIN APP - Boost 148 compatible

Shimano XTR Left Crank Arms - Spindle Interface Type: Hollowtech II

For maximum pedaling efficiency, Shimano's 105 Compact Crankset boasts light, strong and stiff hollow, cold forged-aluminum arms, plus an integrated oversize-steel axle. The compact chainrings are also made of cold-forged aluminum and are ramped and pinned for quick, precise shifting.

Designed for enduro and trail riding, the AMg V2 Alloy chain guide features an upper guide for chain security and an integrated skid to protect the chainring and frame. - Compatible with 1x9, 1x10, and 1x11 drivetrains - Integrated nylon skid glides over rocks - Softer co-molded upper for quiet operation - Installs and adjusts with a single 4mm hex - Compatible with chainlines 49mm and wider - Tracked and grooved upper guide and backplate increases stiffness

TruVativ's Stylo All Mountain Guard is all-mountain chainring protection with style. This 4mm thick aluminum guide is 4 bolt, 104 BCD compatible.

SR Suntour's XCT is a replacement left crank arm for square or diamond taper-oriented cranks that features aluminum alloy construction.

All-City's lightweight Cross Wizard chainring guard is the perfect addition to a single ring or singlespeed setup. While not a full-on mountain bike ‘bash guard’ these are just the thing to keep your chain on and your teeth intact. Named after the one and only Cross Wizard! (You have to say it like that, with the exclamation at the end.) These are available in 110mm and 130mm bolt circle diameters for all your ‘crossy needs. - Material: CNC machined 6061-T6 aluminum