Parts & Accessories

- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish

1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.

Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

Piston Fender Strap Kit

Fat bike skewer and thru axle tube adapters for the Kuat Trio roof rack.

Thru-axle adapter for the Kuat TRIO rack.

So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes

For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.

RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate

The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.

Piston E-Bike Ramp

Trail Doc accessory kit for the NV Base 2.0 rack from Kuat Racks.

The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock. - Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit - Provides 2" of drop or 2" of rise to the vehicle receiver - Provides 10” of Hitch Extension - Matte Black with black water transfer logos - Patent Pending - No Worries Warranty - Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only

Like the first version, the Pivot v2 will make sure your rack never gets in the way. Smoothly swing up to a 4-bike rack to the side for clear access to tailgates, rear doors, and hatchbacks. And when it’s time to load up, the locking mechanism makes sure your rack only moves when you want it to. - Clearance for tailgates or rear doors - Proprietary FLATLOCK cam system - Locking hitch pin - Lifetime Warranty - 2” Hitch Only - Quick-release 90 or 120 degree swing away - Driver-Side or Passenger-Side Swing Options - Compatible with fully loaded 4-bike NV 2.0 - Load up to a maximum of 250lbs

For 2" hitches, this extension gives you more clearance for your bike rack or trailer away from the vehicle. The insert tube is threaded, by bolting in the extension, you get rid of 80% of the play and rattle vs extensions that use a pin. Included is the 8" extension, hitch bolt, and lock pod. Allows BackStage, MonoRail & SplitRail racks to fold flat on Wrangler and other cars with spare tires. Works well with all bike racks including Thule, Yakima, and Kuat. As with all hitch extensions, they lower weight ratings by 50%, confirm you are within specifications before use. - Electroplated plus powdercoat for best rust resistance - Welded steel construction - Includes lock, two keys & wrench for installation - Fits 2" Hitches only - Maximum Trailer Weight- Lower amount of 3500 lbs OR 50% maximum listed on your trailer hitch - Maximum Tongue Weight- Lower amount of 350 lbs or 50% of maximum listed on your hitch. (For use with bicycles, Tongue Weight is your guide, not Trailer Weight)

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones

Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

Secure peace of mind and your trunk rack to vehicle with our Trunk Rack Lock. - Secure bike rack to vehicle to deter theft. - Cables secured within closed trunk. - Includes 8 ft. cable. - Includes 2 keys.

Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

Bike fork mounts you can put anywhere, including truck beds, minivans and SUVs An all-in-one design that fits four thru axle spacing standards: - 15mm x 100mm - 15mm x 110mm - 12mm x 100mm - 20mm x 110mm - Mounts directly to any flat surface for bike transport or storage - Ultimate stability and versatility when mounted t- Saris Triple Track or Single Track (sold separately) - Mounting hardware not included

The HUSKE (HUb Standards Keep Evolving) is a universal fork mount that handles the most common fork mount standards of yesterday, today, and tomorrow. These interchangeable plugs fit into an anodized aluminum extrusion (sold separately). Suitable for all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon.

The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.

The Thule Xadapt 9 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid Aero and Thule Professional load bars. Please contact us with any questions regarding compatibility.

Thule's Load Bar End Caps are replacement end caps for rectangular load bars.

The Thule Xadapt 2 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid or Xsporter load bars. Please contact us with any questions regarding compatibility.

A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks

An adapter for Thule TopRide/Thule FastRide to enable transport of bikes with 20x110mm thru-axles. - Enables transportation of bikes with 20x110 mm thru-axle forks

The TC2 Thule Wheel Tray End Caps are compatible with the following Thule Wheel Trays: Thule 594 Sidearm, 594XT Sidearm, Thule 599XTR Big Mouth, Thule 589 Velo Vise, Thule 590 V2, Thule 590R V2 Recumbent, Thule 591 Long Tray Classic, Thule 517 Peloton, and the Thule 518 Echelon. - Sold as a set of two - Replacement parts for broken or lost end caps

Easy-to-install foot for Thule Edge roof racks, for vehicles with raised railings. - Easy-to-install roof rack feet - For vehicles with raised railings - For Thule Edge roof rack systems - For raised railings Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles with raised railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Rubber lining protects the surface of the raised railings - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

The Thule UpRide Fatbike Adapter lets you easily transport fat bikes on your UpRide rack. It fits bikes with tires up to 5 inches wide.

Thule's Passive Lock Strap provides added security by locking your bicycle rack to your vehicle. Two steel cables enclosed in nylon form a strong durable strap that won’t scratch your vehicle, bike or carrier. A round puck installs securely in trunk or hatch, preventing rack removal.

- Pack includes 2 wheels straps and 2 road adaptors - The WS2 Thule Wheel Straps have a secure ratcheting buckle with a cam tightening mechanism.

Thule's Cable Lock gives added security to your gear. This 6-foot coiled cable lock uses a Thule One-Key Cylinder (included).

An adapter set for Thule FastRide to enable transport of bikes with 9-15mm thru-axles. - Enables transportation of bikes with 9-15mm thru-axles

Two heavy-duty straps with cam-action buckles secure heavy loads while our patented buckle bumpers help to prevent vehicle scratches and dings. - Each strap features steel cam-action buckles and protective Buckle Bumpers that fit snugly over buckles to protect vehicle and load at all times - Packaged as a pair - 15-foot length or 9-foot length

An adapter for Thule ProRide to enable transport of fatbikes. - A set of replacement wheel holders for the Thule ProRide bike carrier - Fits wheel dimensions 3 – 5 inches to enable transport of fatbikes

Fat Tire holder for T2 PRO X

Modifies women's bike frames as well as BMX and non-standard frames to be carried on a hanging-style hitch and strap mount bike racks. Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX, and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely. Features: - Telescopic adjustment (18" - 30.5”) fits most bike frames - New push button clamps for quick installation and removal - Molded rubber pads protect the bike finish - Thule Frame Adapter 982XT - Keeps bike securely centered and mounted on hanging-style rear mounts - Durable rubber collars secure easily and safely to bike stem and seat post

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key

Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 6 locks, all using the same key

Add on for Bed Rider Pro Compact or Full Size

High-grade bike lock developed with ABUS High-quality lock for added security and protection against theft, developed with ABUS. The robust cable has a length of 150 cm and a thickness of 1,2 cm. The lock is compatible with both the two-bike and the three-bike carrier. Maximum security High grade bike lock with loop cable offers added security High quality bike lock for your bikes Developed with ABUS Easy to install Tool-free installation of lock to bike carrier

This 53" long ramp, for use with Thule EasyFold XT, makes it easier to load and unload bikes, especially for taller SUV's and vans. Features - Quickly load and unload bikes from taller vehicles by adding this longer ramp (53") to the Thule EasyFold XT - Easily attach the ramp to the Thule EasyFold XT wheel tray using the tongue and groove connection

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 8 locks, all using the same key

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 38-inch - Fits Thule AeroBlade - Fits Thule SquareBar

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 44-inch - Fits Thule AeroBlade - Fits Thule SquareBar

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks