Parts

This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame. - Alloy construction - Replacement derailleur hanger sold separately (Part Number DP0814) - Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames

All-City Singlespeed Disc Brake Adaptor 

• M4 threaded pedal cages mounting holes • Four windows in pedal body large enough to fit double toe straps • Polished Body • Concave footbed • Single-sided design

Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp. - Laser-etched All-City logo - Aluminum body with stainless steel hardware

Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included. - Aluminum hatch cover with stainless screws - All necessary screws and plates included

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

Bolt on Avid's Shorty Ultimate Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Cost effective stopping power from the leader in cable-actuated disc brakes. - For use with short cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 215 g

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

For the ultimate light-weight brake setup, Avid ditched the concentric caliper-centering washers and gave you titanium bolts to save precious grams. This kit includes ultra-light titanium hardware for standard (direct-mount) mounting.

Box One 70mm Brake Shoes feature a stiff, cold-forged, and CNC-machined cartridge body and triple-compound, 70-millimeter pads for superior braking. Mounting posts that pivot allow for perfect pad alignment, while silver machined accents and laser-etched graphics offer refined aesthetics. - 70-millimeter replacement pads - Pivoting posts - Triple Compound - silver machined accents

Box One™ fork adapters let you run standard "Male" 10mm (3/8" axles) in a fork designed for 20mm axles. - Material 6061-T6 Aluminum

Box One Linear Brake Cable Kits are among the most advanced BMX brake cables on the market. The custom Concentric housing includes aramid fiber-wrapped aluminum/steel linear wires for the best combination of strength and low weight. The inner Nano Cable wires are treated with a PTFE coating that reduces friction and boosts braking performance. Our anodized aluminum Kollars ferrules further reduce cable drag. Each cable kit includes 79 inches of Concentric Linear housing, a black PTFE-coated Nano Cable, four alloy Kollars ferrules and one color-matched and one black alloy cable end caps. Available in chrome, 14K gold, red, blue and black with alloy Kollars ferrules and end caps.

The Box Four shifter's main features aren't strikingly different from Box Three's. The key difference is its 8-speed platform. We've chosen to modernize the 8-speed in much the same way we did the 9-speed for Prime 9. Just like the Prime 9, the Box Four shifters take advantage of the "less is more" theme and exploit durability, simplicity, and reliability. Available as a multi-shift (pull several gears at once) or single-shift shifter (a sound choice for e-bikes). -Our 8 is Enough Shifter -Lightweight Extruded Clamp -Responsive 2 Piece Pull Lever -MTB Style Release Lever (V2) Weight: 128g/4.5oz

Cold forged and fully CNC-machined from several high-strength aluminum alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube. All new Box One™ Stem Locks are backward compatible with existing Box forks and may work with forks from other manufacturers.